IMPORTANT NOTE: Installation of the burner needs to be done by a licensed professional. Improper installation can increase the fire risk and potentially injure those using the oven.
Before installing your oven, you will need to prepare the countertop where you will place it.
The burner assembly is comprised of three separate sections:
- the burner;
- the gas line flex hose; and
- the controller.
The flex hose is long enough to allow the controller to be installed on either the left or right side at the front of the oven.
The burner for your oven will be in the same crate as your oven. It is usually inside the oven and marked as the oven burner assembly. The burner assembly comes preassembled and is approximately 55″ in length including the flex hose.
To install the burner assembly for use with the oven on your counter, you will need an opening from the top of the counter completely through its supporting base. This opening allows the installation technician to install the burner assembly from underneath the oven. The opening is also needed if any future repairs or modifications need to be made. The opening also provides ventilation that is needed by the burner for proper operation. The base of the oven is galvanized steel, and there are four (4) holes where you need to attach the burner with the 4 included screws.
It is very important that no combustible materials be stored under the oven, as this will create a fire hazard.
The Controller:
The controller is made of heavy-duty 405 Stainless Steel and is designed so it can be installed in the front of the oven on either the left or right side. The gas line connector is a standard size 1/2″.
